Core Networks: Fixed & Mobile Data / Voice

LabLabee supports testing and troubleshooting across core network environments, covering fixed, 2G, 3G, 4G, and 5G data and voice services. The catalog includes end-to-end scenarios for service validation, protocol analysis, performance checks, and root-cause troubleshooting across multi-vendor architectures.

Supported use cases include 2G/3G voice and data sessions, 4G/5G data sessions, CS voice, IMS/VoLTE/VoNR call flows, roaming, authentication, registration, mobility, QoS validation, policy and charging, and failure analysis.

Protocols covered include MAP, CAMEL, SS7, ISUP, RANAP, BSSAP, GTP-C/GTP-U, Diameter, SIP, RTP/RTCP, PFCP, NAS, NGAP, HTTP/2 SBI, DNS, DHCP, RADIUS, BGP, and IPsec, among others.

RAN

LabLabee supports testing and troubleshooting across RAN environments, covering 2G, 3G, 4G, 5G, and Open RAN architectures. The catalog includes end-to-end scenarios for radio access validation, UE behavior analysis, protocol troubleshooting, PCAP and log correlation, performance checks, and root-cause analysis across multi-vendor deployments.

Supported use cases include UE attach/registration, call setup, data session validation, handover, mobility, paging, bearer/session establishment, radio failures, throughput issues, latency analysis, interoperability testing, and Open RAN validation.

The platform supports analysis of PCAPs, UE logs, gNB/eNB logs, RAN traces, KPI exports, alarms, and test reports to validate service behavior and identify issues across the radio and core layers.Protocols and interfaces covered include RRC, NAS, NGAP, X2AP, XnAP, S1AP, GTP-C/GTP-U, F1AP, E1AP, E2AP, O-RAN Fronthaul, O1, O2, A1, SCTP, IP, TCP/UDP, and HTTP/2, among others.

End-to-End

LabLabee supports testing and troubleshooting of end-to-end telecom scenarios across RAN, Core, Transport, Telco Cloud, and service layers. The catalog focuses on validating complete user journeys, correlating PCAPs, logs, KPIs, alarms, and test results to identify issues across multi-domain and multi-vendor environments.

Supported use cases include UE registration, attach, authentication, data session establishment, voice call setup, VoLTE/VoNR, roaming, handover, mobility, QoS validation, slicing, latency testing, throughput validation, service degradation analysis, and end-to-end failure troubleshooting.

The platform enables cross-domain validation from UE to RAN, RAN to Core, Core to IMS/Data services, Transport/IP, and Cloud infrastructure, helping teams quickly detect whether an issue comes from the device, radio, transport, core network, cloud platform, or application layer.Protocols and interfaces covered include RRC, NAS, NGAP, S1AP, X2AP, XnAP, GTP-C/GTP-U, PFCP, Diameter, SIP, RTP/RTCP, HTTP/2 SBI, DNS, DHCP, RADIUS, BGP, IPsec, TCP/UDP, SCTP, and Open RAN interfaces, among others.

IP Networks & Transport

LabLabee supports testing and troubleshooting across IP Networks and Transport infrastructures, covering enterprise, service provider, data center, and telecom transport environments. The catalog includes end-to-end scenarios for routing, switching, traffic engineering, service validation, protocol analysis, performance testing, and multi-layer troubleshooting across multi-vendor architectures.

Supported use cases include IP/MPLS validation, BGP routing analysis, VPN services, EVPN/VXLAN, Segment Routing, QoS validation, multicast, traffic engineering, failover and redundancy testing, latency and packet loss analysis, synchronization validation, and transport service troubleshooting.

The platform supports analysis of PCAPs, router and switch logs, telemetry data, SNMP/KPI exports, alarms, and traffic captures to identify network, transport, and service-layer issues in complex infrastructures. Protocols and technologies covered include BGP, OSPF, IS-IS, MPLS, SR-MPLS, SRv6, LDP, RSVP-TE, VXLAN, EVPN, STP, VLAN, QinQ, IPv4/IPv6, TCP/UDP, GRE, IPsec, L2TP, DHCP, DNS, IGMP, PIM, NetFlow/IPFIX, SNMP, gNMI, and Ethernet transport technologies, among others